|
|
|
|
|
Bewertungen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Herzlich Willkommen Gast! Möchten Sie sich anmelden? Oder wollen Sie ein Kundenkonto eröffnen? .
|
|
|
|
|
|
|
|
|
|
| Dreambox DM 100 S Sat Receiver |
− Complete MPEG-2 & DVB-S Support − Input Frequency: 950 ~ 2150 MHz − Tuner Symbol Rate: 1 ~ 45 MS/s − 1 x Smart Card – Reader − 1 x SIM Card − 1 x SCART Interface − USB-B Interface − S/PDIF optical Interface (AC – 3) − Supports Subtitle and Videotext − Multi Picture View (4,9 pictures) − Supports EPG (electronic program guide) − Picture in Graphic (PIG) − Supports SCPC and MCPC of C/Ku band − Support of Bouquet Lists − Full automatically service scan & blind scan − Picture in Picture Support (PIP) − DiSEqC 1.0, 1.1 Motor (1.2) and USALS (1.3) compatible − Supports Signal Beep ON / OFF for easy installation − 10 / 100 MBit compatible Ethernet Interface − Zoom - Function − Comfortable Channall Sorting and Grouping − user friendly 3D OSD − Parental Control Video and Audio − Interner Audio DAC (24bit, 192 kHz Stereo DAC) − Slim and fashionable Design |
|
|
|
|
|
|
|
|
|
|
|
|
| Dreambox DM 7025 S Plus TwinTuner PVR Satreceiver |
Dreambox 7025 S Plus jetzt noch besser mit CI Auswurftaste, OLED Display und Neustem Netzteil.Hauptmerkmal ist der 300 MHz starke Prozessor, Linux OP, die Dreambox DM7025 Plus unterstützt die Standard Linux API (DirectFB, Linux-FB, LIRC, ... ) und besitzt einen 10/100MBit kompatiblen Netzwerkanschluss.
10/100MBit kompatibles Ethernet Interface DSL Kommunikationsport Twin-Tuner als DVB-S, DVB-C oder DVB-T steck- und mischbar, Plug&Play
- 300 MHz Processor - Linux open source (die meisten Teile unter GPL) - Supports Linux Standard API (Direct-FB, Linux-FB, LIRC) - 1 x DVB Common-Interface Einschub mit Auswurftaste - 2 x Smartcard-Reader - Integrierter Compact Flash Leser (Einschub von vorne) - MPEG2 Hardware decoding (DVB kompatibel) - TWIN Tuner, steck- und mischbar, Plug&Play - Tunervarianten DVB-S, DVB-C oder DVB-T, steckbar - 10/100 MBit kompatibler Ethernet Interface - USB Port - Anschluß V.24/RS232 - 12V Switch über Cinch - Großflächiges OLED-Display - 32 MByte Flash - 128 MByte DDR RAM (Arbeitsspeicher) - Eingebauter IDE Anschluss - Festplattenunterstützung für alle üblichen Größen, Timeshiftfunktion - unlimitierte Kanalliste für TV/Radio - Kanalwechsel in weniger als einer Sekunde - vollautomatischer Kanalsuchlauf - Unterstützung von Bouquet-Listen - EPG-Unterstützung (electronic program guide) - Unterstützung von mehrfach LNB-Umschaltung (DiSEqC) - adaptierbares OSD in vielen Sprachen und Skin-Unterstützung - S/PDIF optischer Anschluss AC-3 - 2 x Scart-Anschluß - RF Modulator - Audio/Video Cinch out - MINI-DIN: Anschluss für externe IR und I2C - interne Sende/Empgangs - Dioden (Videorecorder)
DreamBox DM7025 technische Daten
DBS-Tuner: Eingangsfrequenzbereich 950 …. 2150 MHz Eingangspegelbereich - 65 dBm …. - 25 dBm Rauschmaß 12 dB max. DBS-Tuner Eingang F-Buchse Eingangsimpedanz 75 Ohm AFC-Fangbereich +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi und Reed-Solomon Viterbiraten 1/2, 2/3, 3/4, 5/6, 7/8, automatische Anpassung Roll-off Factor 35 % Demultiplexing gemäß ISO 13818-1
Common-Interface: Common-Interface Stromverbrauch max. 0,3A/5V
Videodekodierung: Videokompression MPEG-2 und MPEG-1 kompatibel Videostandard PAL G/ 25 Hz Bildformat 4:3 / 16:9 Bildmaterial 16:9, automatische Anpassung für 16:9 TV-Geräte (über Scart) Letterbox Filterung für 4:3 TV-Geräte
Audiokodierung: Audiokompression MPEG-1 & MPEG-2 Layer I und II Audio Mode Dual (main/sub), Stereo Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Ausgang Analog: Ausgangspegel L/R 0,5 Vss an 600 Ohm THD > 60 dB (1 kHz) Übersprechen < -65 dB
Ausgang Digital: Ausgangspegel 0,5 Vss an 75 Ohm Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Ausgang optisch (AC3)
Video-Parameter: Eingangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm Teletext Filterung entsprechend ETS 300 472 Standard
TV-Scart: Ausgang: FBAS,RGB,S-VHS über OSD wählbar
VCR-Scart: FBAS
Serielle Schnittstelle RS 232: Typ RS232 bi-direktional Bitrate 115,2 kBit/s max. Steckverbinder SUB-D-9 Buchse Funktion: Update der Betriebssoftware
Ethernet: 10/100 MBit kompatibles Interface Funktion: Update der Betriebssoftware, Verbindung mit dem PC
USB: USB 1.2 Anschluss
Mini Din: I2C zur Steuerung externer Geräte IR Funktionen senden
Pinbelegung: 1 5V 2 SDA (I2C-Kanal 2) 3 SCL 4 3,3V 7 GND 8 IR-Ausgang 9 GND
UDMA66 IDE Schnittstelle: Intern für Anschluss HDD max. 500mA Compact Flash - Reader
LNB Stromversorgung: LNB Strom 500mA max. ; kurzschlussfest LNB Spannung vertikal < 14V ohne Last, > 11,5V bei 400mA LNB Spannung horizontal < 20V ohne Last, > 17,3V bei 400mA LNB Abschaltung im Standby-Mode
Anzahl aktiver Satellitenpositionen: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor-Steuerung
Leistungsaufnahme: < 30W (im Betrieb, horizontal Polarisation / 400mA LNB Strom) < 25W (im Betrieb, ohne LNB) < 2W (Deep-Standby-Mode)
Eingangsspannung: 250V / 50 Hz Wechselspannung +/- 15% 110V / 60 Hz Wechselspannung +/- 15% |
|
|
|
|
|
|
|
|
|
|
|
|
| Smargo Smartreader |
Smargo USB universal Kartenleser für Dreambox dm800, dm8000, dm7020, dm7025 und Linux PC. *
Technische Daten:
- Starker ARM® 91 Thumb® Prozessor
- High-Performance 32-bit RISC Architektur
- High-Performance 32-bit RISC Architektur
- 64 Kbytes, organsiert in 512 Seiten mit 128 Bytes (Single Plane)
- 16 Kbytes internen High-Speed SRAM
- Low-Power RC Oszillator, 3 zu 20 MHz On-Chip Oszillator und ein PLL
- Unterstützt 3.20, 3.43, 3.69, 4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0 und 16 MHz bei Smartcards
- Unterstützt standard ftdi_sio Treiber für Windows und Linux Applikationen
- Funktioniert auf allen Dreambox Modellen mit USB Port
- Kein Netzteil benötigt
Bei begrentzter Anzahl von CI Schächten oder Smartcardreadern empfehlenswert! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

|
Sie haben noch keine Artikel in Ihrem Warenkorb.
|
|
|
|
|
|
|
|
|
|
|
|
|
Neue Artikel |
|
|
|
|
|
|
|
|
|
|
|
|
|
 Kundengruppe:Gast
|
|
|
|
|
|
|
|
|